- Joined
- Nov 8, 2012
- Messages
- 783
The iGaging DRO scales are compatible, but the new iGaging Absolute one are not apparently.
Only thing I can figure is some sort of design change.
Has something to do with a different clock speed.
Also the data lines are attenuated with a 5.6K PD resistor, not sure why this is or how it would require a change to the controller.
Only thing I can figure is some sort of design change.
Has something to do with a different clock speed.
Also the data lines are attenuated with a 5.6K PD resistor, not sure why this is or how it would require a change to the controller.