OT What the heck is that in your avatar?

Back in the early '70s, I got interested in CB radio. All the guys were handing out cards to people they met through CB, so I drew this up and had a bunch of cards printed on slime-green paper. Scan and crop, and here we are. An avatar that easily predates the home PC.
 
Last edited:
my avatar is a picture of my best buddy Drake after a good day of wood duck hunting in western kentucky, he passed away in 2005..
 
I just changed to this one to better reflect my screen name and "other" hobby.

It is a view of an SR 3 (short range / 300 yd.) military rifle target, as viewed by the target "puller" standing in the target "pits".
Q: What the heck does that mean?

A: In high power rifle competition the targets are mounted on frames that move up and down on rails and are raised and lowered (by hand) by a person standing in front of the target. These targets and frames are located below ground level in a large trench or "pit" that is dug into the earth. When the targets are UP they are visible to the shooter on the firing line 200, 300 or 600 yards away from the targets.

During a shooting competition or "match" the shooter fires a round at his/her target. After the bullet strikes the target the person "pulling" the target lowers it down into the "pit" and inserts a "spotter disc" into the hole in the target. (The little white circles shown in the black area of the target.) The target is then raised again for the shooter to take his/her next shot. This makes it possible for the shooter to see where he hit his/her target with the use of a spotting scope. It is nearly impossible to see the bullet holes alone even with a good scope. And YES - they ARE shooting over your head when you are performing pit duty! It gets your blood pumping.... ::thumbzup::

Another view:

Pits.jpg

Pits.jpg

Pits.jpg
 
Sheriff Buford T. Justice of Texas from IMHO the one of the funniest movies of all time: Smokey and the Bandit. Plyed by the "Great One" Jackie Gleason.
 
Jerry, yours was one of the ones I was waiting to hear! I can't imagine how nervous I would be driving that....Do you ever get used to it? Is that just the base of the platform that weighs that much? I know I got to go on some wells with my Dad when I was young(he's a well logging engineer) Some impressive stuff out there! There were lots of West Texas reptiles too! Todd
 
Just a .jpg pulled from the internet somewhere. Since I do alot of web 'research' on weekend mornings, it seemed kind of fitting.

Ed
 
One of my other hobbies is photography. I took this photo of myself while wohing on rebuilting a Harbor Freight English Wheel. I photoshopped it a bit. I like how the US flag on the helmet pops.

weldor3s.jpg
 
Last edited by a moderator:
Mine is just a picture of my favourite lathe!
The decal is on the headstock and still looks new and clean, even though the lathe is more than 50 years old!!!

Getting to love the old girl now!

Andrew
 
Back
Top