- Joined
- Dec 21, 2013
- Messages
- 798
Hi all, I have installed a PAM 300 HD and found that when the machine is off the PAM buzzes..
Being my first phase converter I do not know if this is a normal thing for it to do or not.
The mill I am running on it has a hi/lo RPM circuit on the switch if that makes any difference.
Any input would be appreciated as I am not versed in this thing, Thanks Cliff
Being my first phase converter I do not know if this is a normal thing for it to do or not.
The mill I am running on it has a hi/lo RPM circuit on the switch if that makes any difference.
Any input would be appreciated as I am not versed in this thing, Thanks Cliff