- Joined
- Sep 1, 2020
- Messages
- 1,593
This is going to be a long project I just made the crank shaft this is going to be a very basic power scraper fixed stroke and speed. I used mystery steel for this and it was scary the first part flew out and almost hit me so the second one i drilled the center hole first then face it. The last two pics are the first one the flew out
Attachments
-
6BE82D2B-155B-482E-B276-DAA9A27C3EE5.jpeg2.3 MB · Views: 42
-
D6D7B74C-FD69-487C-BAD9-24B74F7A3742.jpeg1.7 MB · Views: 35
-
382C26A7-B484-4C61-9304-7D357CEE796A.jpeg1.5 MB · Views: 31
-
IMG_0617.MOV7.1 MB
-
6DAB91B0-3557-4491-98A6-29FD6D314724.jpeg1.8 MB · Views: 31
-
22F60972-F9E5-4800-968D-DD4AFB19289F.jpeg1.8 MB · Views: 28
-
3176791A-58E6-4328-AEBA-D3E771FB46EF.jpeg1.5 MB · Views: 29
-
6333A918-EB36-45E5-B677-446ABAB6C20E.jpeg872.2 KB · Views: 32
-
FE483212-221A-4774-9E7A-20F41BFBD39E.jpeg1.8 MB · Views: 40