- Joined
- Feb 27, 2014
- Messages
- 2,129
I have two press fits that I need to make and would appreciate it if anyone would check my tool size selections.
thanks
Note: for your browsing pleasure, possible Subject Drift has been pre-approved for this thread .
- First Operation is I need to press a .2500 drill rod into aluminum
- I will use a .2497 diameter reamer
- I will predrill the hole using a 15/64" drill (.2344)
- Second Operation is to press in a .5000 drill rod into aluminum
- I will use a .4995 diameter reamer
- I will pre-drill a hole using a 31/64" drill (.4844)
thanks
Note: for your browsing pleasure, possible Subject Drift has been pre-approved for this thread .