- Joined
- Dec 2, 2015
- Messages
- 35
I usually use a revolving punch, but (when I do not have one handy), I get creative. Most recently, I used an automatic center punch with the punch pin and spring removed. It worked great for punching canvas over a piece of sacrificial wood. The plugs accumulate in the cavity of the punch, so there were no canvas or wood bits to pick up later. A drill works in a pinch if you need to cinch your belt up tighter. Although the holes made sometimes end up a little rough around the edges.
I prefer the look of the one Toolmaster picked out better than the revolving type, so I am going to order one and try it out.
I prefer the look of the one Toolmaster picked out better than the revolving type, so I am going to order one and try it out.