0
09kevin
Forum Guest
Register Today
I am making a rack for my friends 08 Husaberg motorcycle. The first part is made from 6.75” X 10” aluminum plate ¼ thick. I made a sub plate with 3 shoulder bolts to locate and hold the material.
Sub plate
The first operation is to drill and ream the (3) .250 dia holes in the stock for the shoulder bolts. After adding the shoulder bolts I machined the first side complete then flipped the part over and added the .0625R on all edges.
Kevin
Sub plate
The first operation is to drill and ream the (3) .250 dia holes in the stock for the shoulder bolts. After adding the shoulder bolts I machined the first side complete then flipped the part over and added the .0625R on all edges.
Kevin