- Joined
- May 6, 2014
- Messages
- 220
I won an auction last weekend at the Cabin Fever Expo- a nice Albrecht chuck. I brought it home and checked the runout and it seemed high (0.007) so I decided to rebuild it. Getting it open was a chore, but when I did I found it was pretty dirty and the grease was pretty hard. I also noticed that it was missing a ball bearing (only 24 - instead of 25). I ordered some new balls from McMaster-Carr cleaned and regreased then reassembled. Runout is now <0.002.
Looking forward to putting it to good use.
Rick
Looking forward to putting it to good use.
Rick