- Joined
- Jan 13, 2014
- Messages
- 69
For the repair techs out there! Here is the link to the schematics and firmware for the Tormach Control Board.
Back in October 2021 Tormach came out saying they support the right to repair, I knew for a fact they did not and I called them out on it. A long story short a YouTuber with about 2 million subs reacted to my call out. A few days later the Tormach CEO was in contact with me and they released all the repair documentation they had schematics, firmware, etc.
https://github.com/tormach/Repair-Information/
I wish they would have help with Leadshine (their stepper drive supplier) to release the drive schematics.
I also have some firmware for other items I e-mailed them the recoverd files they just have not posted them to the git hub but they can be shared if needed.
Here is the Recovery of the firmware and config bits of the drawbar controller.
I have repaired dozens of the control boards since.
Back in October 2021 Tormach came out saying they support the right to repair, I knew for a fact they did not and I called them out on it. A long story short a YouTuber with about 2 million subs reacted to my call out. A few days later the Tormach CEO was in contact with me and they released all the repair documentation they had schematics, firmware, etc.
https://github.com/tormach/Repair-Information/
I wish they would have help with Leadshine (their stepper drive supplier) to release the drive schematics.
I also have some firmware for other items I e-mailed them the recoverd files they just have not posted them to the git hub but they can be shared if needed.
Here is the Recovery of the firmware and config bits of the drawbar controller.
I have repaired dozens of the control boards since.