- Joined
- Jan 10, 2020
- Messages
- 8
Hi. I’m reaching out to the community to see if there is someone locally who can assist me. I could really use a little help trouble shooting some motor issues with my SB 1002 10K Lathe. An extra pair of skilled hands to help me get the motor adjusted properly would be greatly appreciated.
It runs at all speeds but 1200 RPMs. However at 1200 and sometimes 780 the motor begins to start, runs for a few seconds but never reaches full speed, then trips off. I’ve tried adjusting belt tension but nothing seems to work. The motor works fine when it is not under load—very quiet, smooth and normal sounding. There is no electrical smell. Am I missing something? Is there someone in my area who could lend me a hand?
Thank you,
Stephen
It runs at all speeds but 1200 RPMs. However at 1200 and sometimes 780 the motor begins to start, runs for a few seconds but never reaches full speed, then trips off. I’ve tried adjusting belt tension but nothing seems to work. The motor works fine when it is not under load—very quiet, smooth and normal sounding. There is no electrical smell. Am I missing something? Is there someone in my area who could lend me a hand?
Thank you,
Stephen