I'm working on attempting electro-chemical etching of new machine tags for my MV100. This is largely inspired by some of the work that @kingtutley on instagram is doing for someone with a big Monarch lathe.
So far, I've taken pictures of most of the tags and redrawn them as vector graphics in Inkscape so that I can use toner transfer paper to get a mask onto sheet metal to then etch. Unfortunately there is at least one, maybe two, tags that are just unreadable on my mill, so if one of you guys who also has this model of machine (@Brucepts, @keflaman, @Asm109, @deez123, @mktool) could take pictures, I'd really appreciate it.
Thanks,
Will
So far, I've taken pictures of most of the tags and redrawn them as vector graphics in Inkscape so that I can use toner transfer paper to get a mask onto sheet metal to then etch. Unfortunately there is at least one, maybe two, tags that are just unreadable on my mill, so if one of you guys who also has this model of machine (@Brucepts, @keflaman, @Asm109, @deez123, @mktool) could take pictures, I'd really appreciate it.
Thanks,
Will