- Joined
- Apr 24, 2013
- Messages
- 709
I am using a small laminate trim router as the motor for a tool post grinder.
I have a speed control for the router to keep the RPM reasonable.
I would like to change the rotational direction of the router.
My understanding is that swapping the wires that go to the brushes will change the direction.
Before I started taking things apart, I thought I would check with the forum.
Thanks for the help.
Jim
I have a speed control for the router to keep the RPM reasonable.
I would like to change the rotational direction of the router.
My understanding is that swapping the wires that go to the brushes will change the direction.
Before I started taking things apart, I thought I would check with the forum.
Thanks for the help.
Jim