spindle bearings
The hole idea is to come up with the recommended lift ( or clearance) you have to shim it to get close. Than you can vary the torque to get the lift you want. Mine requires .0007-.001 clearance on the bearings, i ended with .0007 on the rear bearing with 20# torque and .0008 on the front with 25# torque. It takes some time to come up with the write shim i used plastic in different combinations. I think it was around .025 shim.
The hole idea is to come up with the recommended lift ( or clearance) you have to shim it to get close. Than you can vary the torque to get the lift you want. Mine requires .0007-.001 clearance on the bearings, i ended with .0007 on the rear bearing with 20# torque and .0008 on the front with 25# torque. It takes some time to come up with the write shim i used plastic in different combinations. I think it was around .025 shim.