- Joined
- Dec 2, 2016
- Messages
- 234
I will get a electrician to help me out with this but wanted to run it by you guys before hand
Right now I have 3 * 3 Phase machines being powered, not all at once but with a 5HP RPC.
I have the RPC connected to a 50AMP breaker with #12 wire to the panel. From the RPC I have a pigtail female 4 prong socket that I will have connected to an 10-4 extension cord to plug into each other machine. Eventually putting a series of 2 or so sockets on the wall and plugging the machines into this too have two running at a time (no more than 4HP with combined motors).
I would like to add a fused safety switch lever to shutoff the machines and to somehow shut down the RPC as well.
How would I wire a fused safety switch to the panel?
Right now I have 3 * 3 Phase machines being powered, not all at once but with a 5HP RPC.
I have the RPC connected to a 50AMP breaker with #12 wire to the panel. From the RPC I have a pigtail female 4 prong socket that I will have connected to an 10-4 extension cord to plug into each other machine. Eventually putting a series of 2 or so sockets on the wall and plugging the machines into this too have two running at a time (no more than 4HP with combined motors).
I would like to add a fused safety switch lever to shutoff the machines and to somehow shut down the RPC as well.
How would I wire a fused safety switch to the panel?