G
GrahamY
Forum Guest
Register Today
Just a quick hello and a mention that I have a Sieg C2A mini lathe and am still learning how to use it.
I appear to be having problems with chatter when parting off as well as a very slight taper and "banding" on general turning. I am aware that I don't have a carriage lock yet and that could be the cause of the parting problems, however I have purchased some taper roller bearings that I will get around to fitting soon. While I am doing the bearings I will probably do a complete strip down (of the lathe) and check all the other things as well.
I will try and post any problems I encounter (along with solutions I hope) and also if there are any great improvements with anything I try.
Graham (UK)
I appear to be having problems with chatter when parting off as well as a very slight taper and "banding" on general turning. I am aware that I don't have a carriage lock yet and that could be the cause of the parting problems, however I have purchased some taper roller bearings that I will get around to fitting soon. While I am doing the bearings I will probably do a complete strip down (of the lathe) and check all the other things as well.
I will try and post any problems I encounter (along with solutions I hope) and also if there are any great improvements with anything I try.
Graham (UK)