Slide hammer

cathead

CATWERKS LTD
Registered
Joined
Feb 7, 2013
Messages
1,319
This morning I put together a slide hammer. I needed one a week ago when doing some brake work on an old Jeep WJ and had to make do at the time.
With nothing better to do this morning, I made up a better tool. The rod is 1/2 inch diameter cold roll threaded on both ends in 1/2x20 threads. The hammer part
weighs about 8 pounds(I'm guessing on that) so is fairly hefty. The work end was made to accept a variety of bolts or whatever is required for the job.

P1020709.JPG
Meanwhile it can sit under the bench until I need such a tool again.
 
It can take up to an hour for ads to appear on the page. See our code implementation guide for more details. If you already have Auto ad code on your pages there's no need to replace it with this code
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock