[4]

Slotted Angle Plates

[3]
[10] Like what you see?
Click here to donate to this forum and upgrade your account!

Cobra

Active User
H-M Supporter - Gold Member ($25)
Joined
Apr 24, 2013
Messages
695
Did a small project this week making two pairs of slotted angle plates.
Made them from pieces of mild steel angle. One pair were made from 3X3X1/2 angle and the others from 4X4X1/2 angle.

IMG_0273.JPG IMG_0274.JPG

Facing the outer surfaces.

IMG_0275.JPG IMG_0276.JPG

Facing the edges prior to facing the interior surfaces.
 

Cobra

Active User
H-M Supporter - Gold Member ($25)
Joined
Apr 24, 2013
Messages
695
Once the outside and inside surfaces were faced, beveled the outside corner and grooved the interior corner.

IMG_0277.JPG IMG_0281.JPG


Brought the ends to the same dimension

IMG_0280.JPG .

IMG_0282.JPG

Finished plates.
 

higgite

Professional Crastinator
H-M Supporter - Gold Member ($25)
Joined
Aug 15, 2013
Messages
1,021
Nicely done. I like your work holding methods, especially for the edge facing.

Tom
 

Cobra

Active User
H-M Supporter - Gold Member ($25)
Joined
Apr 24, 2013
Messages
695
Nicely done. I like your work holding methods, especially for the edge facing.

Tom
Thanks Tom.
Straight forward project but still satisfying when they were done.
Jim
 
[5] [7]
Top