- Joined
- Feb 7, 2011
- Messages
- 5,039
http://www.onlinemetals.com/merchant.cfm?pid=20475&step=4&showunits=inches&id=1422&top_cat=197
http://www.azom.com/article.aspx?ArticleID=6704
I would get a 5/32" tapcon drill bit hone it sharp, grind a small flat on the ball and give it a try. What do you have to loose?
http://www.azom.com/article.aspx?ArticleID=6704
I would get a 5/32" tapcon drill bit hone it sharp, grind a small flat on the ball and give it a try. What do you have to loose?