Source for

[astjp2]

I need 2 castors for a floor jack, I have done the google searches and McMaster but no luck. It has a 3/8" stud about an inch long and a 2" steel wheel.

 

[OldMachinist]

You could try these http://www.carquest.com/webapp/wcs/...+each__10151_-1_10651_1466405_37491?acesApp=0

They don't list the size but they look about right.

 

[xalky]

the link brings me to the site but not to the item. I can't find the item.

 

[OldMachinist]

Try part number 1010-PV in the search bar.

 

[ScrapMetal]

None of these on McMaster's site would work for you? http://www.mcmaster.com/#standard-wheels/=pfbkae See the steel and iron wheels on the top line.

-Ron

 

[astjp2]

None of these on McMaster's site would work for you? http://www.mcmaster.com/#standard-wheels/=pfbkae See the steel and iron wheels on the top line.

-Ron

I need the whole castor, not just the wheel. The previous owner wore the swivel body down and the normal castors don't fit the jack I am looking for.

 

[ScrapMetal]

I need the whole castor, not just the wheel. The previous owner wore the swivel body down and the normal castors don't fit the jack I am looking for.

Got it. That does make it a bit more difficult to source. What brand is the floor jack? Down towards the bottom of this link - http://www.hcrcnow.com/shop/parts there are a couple different casters that cover Walkers, Lincoln, Hein Werner, and Blackhawk jacks. If it's Sears (Hey, it could be :biggrin: Even if it's not some of the parts might work.) I see a number of different options available here - http://www.searspartsdirect.com/partsdirect/brands-products/craftsman-parts/hydraulic-jack-parts


Hope that helps,

-Ron

 

[shoeboxpaul]

Hi,
My suggestion would be to get in touch with a Snap-On tool dealer and see if they can still get them. Snap-On used Lincoln hydraulics back in the 80's when I was a dealer. The warehouse was in Hanover, MD. People used to call the warehouse/distribution center and ask questions directly. Might be worth a shot. Sorry, I have no phone number but, they should be east to find.
Good luck and let us know what find.
Paul

 

[astjp2]

This is what I need them for, not many around from what I can tell. Tim

 

[TOOLMASTER]

they are probably just steel wheels...no rubber