ok. Thanks for all that. It’s seems that a 30 taper will fit but the South Bend mill can’t use a drawbar. The motor is install right on top the spindle. So that made notches on the taper and have set screws that hold the tool.
So I guess I can grind a notch. And then have tooling to make milled notches.
I would like to hear from someone that own ones of these that the taper will definitely it.
So I guess I can grind a notch. And then have tooling to make milled notches.
I would like to hear from someone that own ones of these that the taper will definitely it.