My Burke #4 came with a split phase motor that I have disassembled/cleaned up and verified that forward and reverse (reversing Red start and Black power cord) work. Although I plan on replace this with a 3 phase/VFD setup I would still like to understand the drum switch wiring for the split phase motor that I have.
The top part of my chicken scratch drawing is the motor wiring for forward (left) and reverse (right). The bottom are the drum switch contacts. The schematic connection diagram is from the Logan Online store.
So do I have the schematic terminals numbered correctly in the bottom half of my chicken scratch drawing? And if so what are the connections for the plug wires and motor wires?
I'm sure the answer is very simple although my brain cannot see it this point.
The top part of my chicken scratch drawing is the motor wiring for forward (left) and reverse (right). The bottom are the drum switch contacts. The schematic connection diagram is from the Logan Online store.
So do I have the schematic terminals numbered correctly in the bottom half of my chicken scratch drawing? And if so what are the connections for the plug wires and motor wires?
I'm sure the answer is very simple although my brain cannot see it this point.