In 1.25 hours, I got a punch and die. Punch is 4mm and die is about 6.5mm.
Used drill rod.
I need to refine the shape now and make them smaller as these seem way too big for 7/8 scale, which is what I build outdoor trains 1:13.7 scale
To make rivets, I'm using my drill press. Material is sheet steel.
Used drill rod.
I need to refine the shape now and make them smaller as these seem way too big for 7/8 scale, which is what I build outdoor trains 1:13.7 scale
To make rivets, I'm using my drill press. Material is sheet steel.