- Joined
- Jan 7, 2013
- Messages
- 485
Maybe, you need to disassemble the complete unit and check each piece for fit. What I mean is take threaded section out and check the threads. I would then thread it into the quill and check to see how they mate (both pieces are out of the tailstock). Next I would see how the quill slides into the tailstock. See if it slides easily, if so, you may have an alignment problem (threads to quill when installed). If you break it into steps I think you will be able to determine where the problem lye's. Tail stocks should work freely, almost moving by itself with were little resistance.
Hope this helps.
Paul
Hope this helps.
Paul