- Joined
- Jan 2, 2011
- Messages
- 331
allthumbz link=topic=1123.msg5262#msg5262 date=1298333317 said:Chuck,
You have some points. By the way, what type of paint are you talking about?
If I were repainting, I would use the B-M color that is on a sticky in this forum- it comes close to the original.
As per what Walter said, I am going to put all the screws and other handware together and try to ID it first, so I don't go too far off.
Thanks,
Nelson
It is Gray POR-15 rust paint topped with a two part Dark Gray POR-15 Hardnose Paint. Hard as a rock! Very expensive, it's gonna cost about 180.00, but I figure with all the work involved, I don't want nothing thats gonna peel, chip or scratch. You need an air pump system if you are going to spray it. I didn't when I painted this and was real sick for two days. I can still feel the affects a week later. You can also brush paint it, which is much safer.
http://www.por15.com/
More: http://s926.photobucket.com/albums/ad106/doorguru/SB Heavy 10/Restore/?albumview=slideshow
Last edited by a moderator: