- Joined
- Sep 24, 2020
- Messages
- 1,911
The new to me 3 jaw chuck does not fit my spindle.
It is 1 1/2-8, as is mine.
It starts but tightens up about 1 thread on.
The backplate threads are flat on top, I think they are not deep enough for my spindle. So, when I put it in the 4 jaw, where do I indicate it?
Spindle register or chuck register ?
It is 1 1/2-8, as is mine.
It starts but tightens up about 1 thread on.
The backplate threads are flat on top, I think they are not deep enough for my spindle. So, when I put it in the 4 jaw, where do I indicate it?
Spindle register or chuck register ?