Threading attachment

[Richard Beitzel]

I am in the need of a threading attachment for a sigma Sn40 lathe needs to be complete with threading disks


Sent from my moto g(7) power using Tapatalk

 

[brino]

Hi Richard,

Welcome to the site!

Can you post some info, links, or photos?
I can't picture what you're after......I know what a threading dial is, but what disks do you need?
Does the threading dial require different gears for different pitches? (metric vs. imperial?)
Do you need the change gears?

Help us to help you.

-brino

 

[darkzero]

I'm confused to. Maybe threading dies & a tail stock die holder?

 

[Richard Beitzel]

Attachment mounts on the Post and has disks for different threads

Sent from my moto g(7) power using Tapatalk

 

[brino]

Attachment mounts on the Post and has disks for different threads

okay, now I'm even more confused.
I did search the lathe at lathes.co.uk, but saw nothing useful......hmmmm

-brino

 

[Richard Beitzel]

The Post is on the side of the carriage tried to send photo but don't have enough signal

Sent from my moto g(7) power using Tapatalk

 

[darkzero]

Attachment mounts on the Post and has disks for different threads

Sent from my moto g(7) power using Tapatalk

If not the tool post, what part of the lathe are you referring to as the post?

Still sounds like a tail stock die holder to me. Post as in the tail stock quill? But a die holder would mount in the quill, not on it.

 

[Richard Beitzel]

Try this

Sent from my moto g(7) power using Tapatalk

 

[darkzero]

Ah, looks like the threading dial is what you are looking for? Not sure what you mean by different threading disks though.

 

[Richard Beitzel]

The one I saw had small disks you could change not sure why I haven't bought a manual for the lathe

Sent from my moto g(7) power using Tapatalk