Im looking for good choices for indexible tooling for my south bend. I know there probably has been many discussions, im new to the site, ive searched few things, still not clear. this is my intentions
Ide like to be able to machine from left to right, right to left part ( turning to a shoulder ), parting tool, and a bit that can be used for overall turning an od. I would rather have indexible tooling, and preferably quality not budget.
I will possibly get into hss bits, thats what I use now, but they are all ones I purchased and have already been made and in the future, Ide like to be able to make some of my own. any help / suggestions will be greatly appreciated. thanks for accepting me to the site.
my quick change holder holds .5 x.5 shanks.
brass and aluminum
stainless
and carbon steel
Ide like to be able to machine from left to right, right to left part ( turning to a shoulder ), parting tool, and a bit that can be used for overall turning an od. I would rather have indexible tooling, and preferably quality not budget.
I will possibly get into hss bits, thats what I use now, but they are all ones I purchased and have already been made and in the future, Ide like to be able to make some of my own. any help / suggestions will be greatly appreciated. thanks for accepting me to the site.
my quick change holder holds .5 x.5 shanks.
brass and aluminum
stainless
and carbon steel