Help! I' m trying to wire an older motor to a drum switch, so as to have a reverse in my 9" sb lathe. The motor is a craftsman general purpose motor, model 113.12140, mfg. model ks608sk-1941. At the motor wire connection, there are 4 wires. power is connected to two of them, there is 2 additional wires,a yellow and a blue wire. On the back of the connection cover, is says to change direction, swap the connection to the yellow and blue wire. I've been trying to attach pictures, but cannot tell if they are attached. I'm trying to hook up to a dayton drum switch, which has a diagram on the inside of the cover, which might as well be written in chinese, (not for a carpenter to understand). The motor is a capacitor start, single phase, 110volt. Anybody know if this motor is capable of working foward and reverse? Any chance somebody can send a "simple" line drawing of how to hook up. I've looked at past posts, but so far, no help. Thanks in advance, Jim.