- Joined
- Apr 28, 2014
- Messages
- 3,590
All these years and I have never seen that nor thought of it. Talk about the obvious staring you in the face!I have used a simple method to synchronize the sequential starts on my 3 jaw in my SB 9A. This assumes that all 3 jaws are starting in their correct slots. What I do is insert all 3 jaws and snap a stretched O ring or strong rubber band around the jaws to place a light force inward on them. After that I rotate the scroll backwards until I recognize 3 or more clicks. Then I rotate the scroll inward and the jaws will find their way into the correct position. If 1 jaw is out 1 notch I reverse the procedure until all 3 synchronize.
And I have a coffee can filled with large bands. Must learn something new each and every day...