Vevor Lathe User Manual needed

L

lesrhorer

Registered
Registered
Joined
Jul 6, 2021
Messages
358
I bought a Vevor 200 x 750 Lathe, and overall I am satisfied, given the fairly low cost. They sent the wrong model lathe, with a smaller motor and no steady or follow rest, but the vendor has made up for those deficits. What they and Vevor customer service have not done is get me a reasonable user manual. First of all, neither the hard copy nor the digital copy is for the lathe I have, although both are similar. Neither one, however, is useably legible or complete. The lathe I have is an MX-750A. The paper manual is for the MX-750, which is significantly different, and omits a great deal of important information. The electronic copy is for a YS-2275A, which is even more different, although once again somewhat similar. Does anyone have a legible soft copy of a comprehensive manual for a Vevor 8" x 29" lathe?

1627949972944.jpeg
 
No, not really. I was able to piece together most of the information, though. Thanks for asking.
 
After a few months, how are you liking the lathe? Size for price I've got to say I'm getting pretty interested in this machine.
 
Well, I don't hate it, but it definitely has its issues. I changed to a much more powerful, higher speed, 3 phase motor and changed to a 1:1 gear ratio, resulting in both much higher maximum speed and overall greater torque, added a DRO, upgraded the hand wheels, and several other enhancements. You can see the upgrades here.
 
Hello,

Did you ever find the Manuals for the Vevor mx-750A lathe?
Getting information out of Vevor is impossible.

Is this thread/group still functional?
have fun
martin
 
martin koch said:
Hello,

Did you ever find the Manuals for the Vevor mx-750A lathe?
Getting information out of Vevor is impossible.

Is this thread/group still functional?
have fun
martin
Click to expand...
Hello and welcome Martin,

Yes, we're still here and very active. Hopefully the OP will get back with you, did you need a manual for this machine?

Most of these small cheap machine come out of the same factory so a manual from something similar will probably work, what kind of questions do you have?

John
 
No, I did not. I managed to figure out pretty much everything I needed, however.
 
I'm not sure what the difference is between the MX-750 and the MX-750A, but I just received a MX-750 via Amazon, and it seems to have a new manual, which may be of use to the MX-750 users.

Since I'm a new HM member, I'm not allowed to post any web addresses. I tried to attach it to this posting but it's too large (38 MB) to upload. Anyone can message me if they want it, and I can email it to them.

Oh, and the manual doesn't refer to it as the MX-750. It shows the lathe with MX-750 in the pictures, but it calls it an MX-220*750 which is odd. No "Vevor" name on the manual, and it has a parts list, exploded diagrams, but the parts-list has an mistake and doesn't cover all the parts. Still, this newer manual does have some things that the other manual on the Vevor website doesn't show.

- Thomas
(new member, without ability to post any new web links.)
 
You must log in or register to reply here.
Back
Top