- Joined
- May 6, 2014
- Messages
- 220
I picked up what I thought was a SB 9 follower rest at the Cabin Fever Expo this weekend. Turns out it is for a 10 inch lathe (the center is 1/2 inch too high). Bummer. It is in good shape (I stripped off the existing paint and there are no defects). Hopefully I can sell to someone with a 10 inch SB. or maybe there is someone out there with a 9 inch version they want to trade. I know some have made brackets to use a 9 inch rest on a 10 inch lathe, but I don't think there is an easy fix in reverse.
Rick
![IMG_2672.JPG IMG_2672.JPG](https://www.hobby-machinist.com/data/attachments/100/100991-38df3c44fdc642da190d5d8ec86ca737.jpg)
![IMG_2673.JPG IMG_2673.JPG](https://www.hobby-machinist.com/data/attachments/100/100992-b660a2e583daf9432eb6b26164811860.jpg)
Rick
![IMG_2672.JPG IMG_2672.JPG](https://www.hobby-machinist.com/data/attachments/100/100991-38df3c44fdc642da190d5d8ec86ca737.jpg)
![IMG_2673.JPG IMG_2673.JPG](https://www.hobby-machinist.com/data/attachments/100/100992-b660a2e583daf9432eb6b26164811860.jpg)