- Joined
- Nov 10, 2013
- Messages
- 837
The old Enco model was made by Gamet. They turn up on Ebay fairly often and are pretty well made. I bought mine with an R8 shank. I used Wall-hoppers for many years in my horizontal boring mill days, a fine piece of equipment. The cheaper Gamet will do the same stuff given the constraints of a Bridgeport.
As far as what you can do in a Grizzly mill, it depends on the model and rigidity. You can get away with doing just about anything with sharp tools and shallow cuts.
As far as what you can do in a Grizzly mill, it depends on the model and rigidity. You can get away with doing just about anything with sharp tools and shallow cuts.