What lathe do these belong to?

[RaisedByWolves]

Lathe chuck and dog plate I acquired in a tooling lot.

Inner dimension of spindle thread is .680ish. 3/4"-??? 18MM-????






Next is a tool holder that I have found previously but it now seems to be unfindable.

Something along the lines of Tiag, sherline, unimat.









Chuck key for a very specific chuck, but again, cant find it.

Very distinct sprocket on the chuck end.






Any help greatly appreciated.

 

[EricB]

The chuck and faceplate are Sherline parts (sold by or Jensen or Craftsman since the chuck isn't marked). Mine came in a Craftsman box. The thread size is 3/4-16.



I don't recognise the other two parts.

Eric

 

[markba633csi]

The chuck and faceplate may also fit a Craftsman 109 series lathe possibly

 

[EricB]

The chuck and faceplate may also fit a Craftsman 109 series lathe possibly

Not without an adapter.

 

[kvt]

Looks like chuck and faceplate for Sherline lathe, They actually made one for Craftsman, at one point The older ones had a brass bed, then wen to steel. A few people made tool post for that size lathe, but have not seen one like that one.