- Joined
- Sep 1, 2018
- Messages
- 652
had these a few years. May have got the slide and compound with a hardinge lathe. Maybe not Fits a v bed so maybe. The headstock rear bearing is Babbitt type. Front brass. No back gear. 1.5x8 spindle. Made it into a dividing head then picked up a small Dayton with foot.
Attachments
-
5AF0257C-51A0-4AFD-84D3-D211B2DFD979.jpeg311.4 KB · Views: 56
-
BF2BF2B2-C65F-43C1-9BA9-1A058BD22B07.jpeg275.6 KB · Views: 50
-
D4CC865A-DE0B-440A-8610-68657A8225DD.jpeg541 KB · Views: 45
-
176B49FD-DD3D-442C-82AB-A80F0CA285D7.jpeg326.7 KB · Views: 43
-
ACCF0972-1B80-4655-846A-B06AAF802F4B.jpeg309.4 KB · Views: 46
-
2B394820-DA32-401C-89D8-473132E55443.jpeg328.2 KB · Views: 58