- Joined
- Aug 4, 2015
- Messages
- 291
OK, so some of you probably read my post that I got an OLD (serial number 23190) South Bend Series O lathe that's change gear. Got lots of gears, that don't fit the thing. The shaft had been sleeved to fit a larger size but is originally 5/8. Common South Bend size for the lead screw and a 20 era 13 inch lathe lead screw. These gears I got are 7/8 ID and .950 wide. Figured out they aint South Bend at all. So what do they go to.... Any idea's? And is anyone looking for some gears this size.