Workshop manual for a Hafco AL 330 lathe

SA Raider

Registered
Registered
Joined
Apr 17, 2019
Messages
2
I have just bought a Hercus badged Hafco AL 330 metal lathe, machine number 16731, dated 1997. Can anyone please help as to where I can get a workshop manual for this machine.
 

john.k

Registered
Registered
Joined
Nov 4, 2018
Messages
257
I believe your lathe was factory identified as a CQ 6230.........and there are heaps of details and downloads online...........please reply if this is not so.......(Maker Shaoxing Tongli MTC,of Zhejang.PRC.)
 

john.k

Registered
Registered
Joined
Nov 4, 2018
Messages
257
For those who may look up this info.......the earlier versions of the 6230 lathe,(and many others),while appearing to have standard metric bearings ,in fact have a spindle bearing,both ends,that has a tapered outside diameter of the cup,rather than cylindrical,and seats in a taper in the casting........These are not available,and replacements must be made ,(taper ground),or the casting reworked....I do not know when the change to standard bearings occurred.
 
It can take up to an hour for ads to appear on the page. See our code implementation guide for more details. If you already have Auto ad code on your pages there's no need to replace it with this code
Top
AdBlock Detected

We get it, advertisements are annoying!

Sure, ad-blocking software does a great job at blocking ads, but it also blocks useful features of our website. For the best site experience please disable your AdBlocker.

I've Disabled AdBlock