A reostat in the feed will reduce the speed, But also the power. a PMR circut only reduces the speed, One can be made using a 555 timer chip very cheaply.
I have a micro switch stop on the table, With a push button override for the return.
Brian.
I shortened the post little,
but the question is: can or will you explain how to make a PMR speed control in detail ? im sure I have a 555 timer in my electronics drawer, but I am weaponless in the war with electrons. . .
I tried the light dimmer switch idea, to a 16v door bell transformer and thru a bridge rectifier, and got 16v dc but the motor would not even budge, just a whimper and humm .
I have 14.4 drill motor, and a couple window motors that I assume are 14v, that I would just love to use.
thanks brian.
I shortened the post little,
but the question is: can or will you explain how to make a PMR speed control in detail ?
thanks brian.
Nice job. What RPM range are you getting? What is the ratio of the 2 gears? 12vdc I assume.
I also used a 12 pt socket as a engage/disengage clutch for my power feed. The window lift motor has plenty of power for G0619 mill.
View attachment 53913View attachment 53914View attachment 53915