Here is one more option that has worked well for me. I could have welded but didn't want to paint so I riveted aluminum angle.
http://www.hobby-machinist.com/threads/new-g4003g-lathe-alignment-problem.18734/
The rustoleum hammered green finish is pretty close. That is what I used, but I painted the whole stand to make sure it would match.
http://smile.amazon.com/dp/B0002YVWJWCouldn't find the hammered green. I think I read somewhere that it has been discontinued. I'll do some "Googling" and see what I come up with. Might even take a sample of the sheet metal down to the paint store and see what kind of match they can come up with.
The paint I found looks like it is just a flat color, but the "hue" looks pretty close.
Couldn't find the hammered green. I think I read somewhere that it has been discontinued. I'll do some "Googling" and see what I come up with. Might even take a sample of the sheet metal down to the paint store and see what kind of match they can come up with.
The paint I found looks like it is just a flat color, but the "hue" looks pretty close.