Well, no machining in the shop today, but a little re-organizing.... It was well overdue... A cow couldn't find her calf in my shop at the present time...
![Stick Out Tongue :p :p](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
anic:
I have been accumulating chucks, dividing heads, vises, etc. and they all end up on the floor for lack of a better spot. With all the windows in my shop and the configuration of the space, it's very difficult to build any shelving. So I decided to move things around a bit and make some room. I moved my wooden plane collection to the other end of the shop, freeing up some wall space for some shelving.
I then built a bank of shelves using 2"x2" 's, 2"x4" 's and 3/4" plywood. The shelves are 16" deep and 6' long with the top shelf at 8'. Everything is screwed together.... my shop continues to morph as I go along. It was originally designed for woodworking only, but I caught "the bug" and I'm running out of room...
Here's a few pics of the shelves in place as well as a start at filling them...
I am planning on installing my horizontal mill next to the shelves, hence the cutter storage. It's a start and it felt good to sit on a stool at the end of today, crack a beer and just look at the results... it's not likely to stay that neat and tidy, but here's hoping...
Brian
![IMGP0964600x800_zps8c3a6dfa.jpg IMGP0964600x800_zps8c3a6dfa.jpg](https://www.hobby-machinist.com/data/attachments/130/130466-24e24e651e00411588b3b361235a24cb.jpg)