- Joined
- Sep 26, 2013
- Messages
- 408
Very happy, found this on CL 1.5 miles from my house. This is basically an "as new" Clausing 8530 from the original owner (1972)with a oem vise and dividing head(which is unused), and an Anilam xy dro(new in 1984, anyone heard of it?). Original owners manual for both and Clausing test report for this mill, #010127. . You may have seen my other threads here on a 8530 with power feed I got awhile back that I'm rebuilding(so now I have two 8530s!), going to sell that and keep this. I'll be picking it up tomorrow, here are a few pics, probably more to follow.
Brian
82 year old seller John, he was really happy someone got it who appreciates it(probably almost as happy as I am!)
not a scratch on it, he has removed the table handles and put protective foam on the shafts, the handles are all there
OEM unused dividing head, plates, and tailstock bought new with the mill
Clausing vise with rotating base, also purchased new with mill
dro on table, you can see the black mounting arm on the right
Brian
82 year old seller John, he was really happy someone got it who appreciates it(probably almost as happy as I am!)
not a scratch on it, he has removed the table handles and put protective foam on the shafts, the handles are all there
OEM unused dividing head, plates, and tailstock bought new with the mill
Clausing vise with rotating base, also purchased new with mill
dro on table, you can see the black mounting arm on the right
Last edited: