Chris,
Unfortunately I did not take pictures during the build process. I kept telling myself I should, just never did, and since it was pushing the limits of my small machines, it would have been good to.
The table sits on the top of the riser.
That is how I had planned it, but in practice, it may work better, if the crank mech is mounted above or below the "nut" and clamped off, and the nut is left free to move the table.
Here is a picture of mine with the table, and a few other ideas I had collected before building mine.
I love this design. I don't have a CNC machine or lathe to cut the right sized metal parts that go around the pillar of my drill though...Ok, so last night I moved the raiser mechanism above the table, and it works much better this way.
Thanks everyone for the kind words.
View attachment 168386
View attachment 168387