Very good(best) easy push casters.
+2 . I have a large pile of them . One set are going onto the smaller Vidmar .+1 for Carrymaster casters.
Buy these 4 or 6 and adjust your weight estimate down 75 lbs or so . These wheels don't have levelers either . On a table that large that's something to consider .I was looking at these and thinking about putting one on each corner, but I'm concerned about them only being 880lb rating, I estimate my table to be very close to that or a few pounds over.
Maybe something like this would work for you.Greetings! I have a 11.5' x 3.5' table made out of 3/8" steel plate and 3/8 x 3" angle iron, I estimate it weighs somewhere close to 900 pounds. I need to move said table into my new shop, that's enough of an adventure on it's own but I can do that.
I need to find a good caster for the table so I can position it and move it if I ever need to. I would like to have casters that are fully retractable and use the tables own legs rather than having its own legs. I want to pick the table up onto the wheels to move it.
I saw some that might work on amazon but they come in sets of 4 and due to the weight and having 6 legs I'd need to buy 2 sets and then I'd have 2 casters that I'd never use.
Does anyone have any good heavy duty casters to recommend? Preferably would come in a set of 6 and must total at least 1000lbs capacity.
Thanks!
Can you post a picture of your bench?
I don’t think you’re gonna find anybody selling sets of six. You’ll have to buy singles if you want exactly 6.