Remove the table lock. There is a plunger inside that has the matching angle to the table dovetail. Use a magnet to remove...
The table was about 80 pounds heavier than me and I was able to remove it by hand this way.
The table is HEAVY 250 pounds... with a heavy enough table right next to the machine it's not too bad.
Time to pull the table off...I built a simple workbench at work height for me...about 37" high...less cuts on my lumber I had.
Remove the table lock. There is a plunger inside that has the matching angle to the table dovetail. Use a magnet to remove...
How the adjustment screw fits in the gib.
Overview of the gib and screw showing adjustment screw and oil pathways on the other side.
Overview of the gib and screw showing adjustment screw and oil pathways.
expressline99

Remove the table lock. There is a plunger inside that has the matching angle to the table dovetail. Use a magnet to remove...

The plunger can be removed by magnet or after the table is removed you can pop it out from the inside of the dovetail.
Click to expand...

Media information

Album
Bridgeport Series 1 VS 2hp Tear down of the table and saddle
Added by
expressline99
Date added
View count
607
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON COOLPIX S560
Aperture
ƒ/3.5
Focal length
6.3 mm
Exposure time
1/72 second(s)
ISO
250
Flash
Auto, did not fire
Filename
DSCN6024.JPG
File size
2.2 MB
Date taken
Sun, 06 August 2017 5:11 PM
Dimensions
3648px x 2736px

Share this media

Back
Top