Roughly the position the lower belt housing will be before you attach it next.
Use the other 2 cap screws here to finish securing the lower belt housing to the heaad unit. These are on the front.
Use 2 of the cap screws here. These two holes are in the back.
The four cap screws you will need to mount the lower belt housing to the head unit.
Roughly the position the lower belt housing will be before you attach it next.
Another view of how the timing belt is installed. Looking down through the lower belt housing.
At this point you are going to wish you had three hands.
This is the top of the gear housing showing the timing pulley. Put your new timing belt on now like shown.
expressline99

Roughly the position the lower belt housing will be before you attach it next.

Media information

Album
Bridgeport Series 1 VS 2hp reinstalling lower/upper belt housing on the head
Added by
expressline99
Date added
View count
468
Comment count
0
Rating
0.00 star(s) 0 ratings

Image metadata

Device
NIKON COOLPIX S560
Aperture
ƒ/3.5
Focal length
6.3 mm
Exposure time
1/46 second(s)
ISO
400
Flash
Off, did not fire
Filename
DSCN5727.JPG
File size
2.2 MB
Date taken
Sat, 20 May 2017 6:08 PM
Dimensions
3648px x 2736px

Share this media

Back
Top