- Joined
- Feb 8, 2014
- Messages
- 11,144
I designed and built the following circuit. It consists of a power supply, two Solid State Relays, two DPDT PRD relays and two small linear actuators.
The PRD relays RR1 and RR2 act as the reversing contactor, the SSRs are the power switch.
The problem is that I seem to have a dead short. Double checked that the wiring is per the drawing.
The lower schematic is an alternate configuration, but the same function.
I don't see a shorted path, maybe you can see something
The PRD relays RR1 and RR2 act as the reversing contactor, the SSRs are the power switch.
The problem is that I seem to have a dead short. Double checked that the wiring is per the drawing.
The lower schematic is an alternate configuration, but the same function.
I don't see a shorted path, maybe you can see something