- Joined
- Dec 11, 2023
- Messages
- 5
Hi all
First time poster on here.. I’ve just taken delivery of a Colchester Lathe. My work were wanting to move it on so I jumped at the chance to have it.
I’m abit of a dead end, I have 3 Phase and earth supply (4pin plug). My lathe is 3 Phase Neutral and earth (5pin plug). I’m not huge on electrical engineering but looking for a way to solve this.. is there anyway I can run my machine on that supply by using an “adapter” to change to 4pin plug or is that out of the question for this application. Any help is very much appreciated.
Euan
First time poster on here.. I’ve just taken delivery of a Colchester Lathe. My work were wanting to move it on so I jumped at the chance to have it.
I’m abit of a dead end, I have 3 Phase and earth supply (4pin plug). My lathe is 3 Phase Neutral and earth (5pin plug). I’m not huge on electrical engineering but looking for a way to solve this.. is there anyway I can run my machine on that supply by using an “adapter” to change to 4pin plug or is that out of the question for this application. Any help is very much appreciated.
Euan