- Joined
- Jan 26, 2024
- Messages
- 57
I made up this bench for a new G0602, now on its way from Grizzly. Found a good spot in the garage and dropped a 20 amp 110 circuit to it over the weekend.
Weld table bench top is 36"x16" and rated for 1,000 lbs.
I already have a good tooling package for this, including an AXA QCTP with 3/8" bits
First mod will be to install a ToAuto DRO with 200/500 mm scales, in the boxes on the lower shelf in above picture: https://www.amazon.com/Digital-Readout-Precision-Milling-Machine/dp/B088K2RN6B/ref=sr_1_3?crid=3KHU4PFE6IIJA&dib=eyJ2IjoiMSJ9.f19ezcIMEhYswMiOyQpBTfksC58HqMYlfDC1UuX3h-3Jkv35lOysNdvFNS8xcoVKNHHH2ojBoEjy_3p_DEB1Hga59gi2PrLI5NtGK81J2QoG_3I5mn-D6M31BUgsTsBp-XRJjlanYzGLogE2-NSQuotoveJ1wouN3uTr3ArFznSY_18LNtSwtOfnv15la5M_iTRhKSAnAGiaSs1Jgo6z4-0LIuOycemc6t-kAdsCt1M.LAZbv7vfhgRAFlDSbjtv5rfFyRWTYNAlOU8ur7a9oDw&dib_tag=se&keywords=toauto+dro&qid=1712593080&sprefix=toauto+dro,aps,99&sr=8-3&th=1.
Looking for a suggested way to mount the cross slide scale on one of these 10x22 lathes, I've looked several really good postings and videos. What works best?
Any other suggestions for this setup?
Weld table bench top is 36"x16" and rated for 1,000 lbs.
I already have a good tooling package for this, including an AXA QCTP with 3/8" bits
First mod will be to install a ToAuto DRO with 200/500 mm scales, in the boxes on the lower shelf in above picture: https://www.amazon.com/Digital-Readout-Precision-Milling-Machine/dp/B088K2RN6B/ref=sr_1_3?crid=3KHU4PFE6IIJA&dib=eyJ2IjoiMSJ9.f19ezcIMEhYswMiOyQpBTfksC58HqMYlfDC1UuX3h-3Jkv35lOysNdvFNS8xcoVKNHHH2ojBoEjy_3p_DEB1Hga59gi2PrLI5NtGK81J2QoG_3I5mn-D6M31BUgsTsBp-XRJjlanYzGLogE2-NSQuotoveJ1wouN3uTr3ArFznSY_18LNtSwtOfnv15la5M_iTRhKSAnAGiaSs1Jgo6z4-0LIuOycemc6t-kAdsCt1M.LAZbv7vfhgRAFlDSbjtv5rfFyRWTYNAlOU8ur7a9oDw&dib_tag=se&keywords=toauto+dro&qid=1712593080&sprefix=toauto+dro,aps,99&sr=8-3&th=1.
Looking for a suggested way to mount the cross slide scale on one of these 10x22 lathes, I've looked several really good postings and videos. What works best?
Any other suggestions for this setup?