- Joined
- Dec 31, 2010
- Messages
- 937
I have had this for over a year now want to learn to sharpen HSS end mills. I am the third owner and do not have any written information. However, you will see a Craftsman (General Tool) drill bit holder attached to the table that works well on the machine. Two tailstocks came with it one for R-8 collets, the other has an MT3 taper. The wheel with the lever moves the table laterally("X") and the wheel in the center moves the table fore and aft ("Y"). It has adjustable column height and rotation also. A well built machine that I hope to put to good use.
Ray