- Joined
- Mar 8, 2014
- Messages
- 41
Starting at the top left colored section, the dimensions on my Grizzly G4003G from 2014 are: .336" horizontal then .125" vertical, then 3.93" sloping up, then .197" horizontal, then .416" slanting down, then .756" vertical, then .784" horizontal. These are not easy to directly grab with the calipers, so they are a bit approximate.
Xiansheng, attached is a .pdf of a drawing of what I hope are the pertinent dimensions of my Grizzly G4002. I measured my lathe and drew the machine in SolidWorks to design accessories for the lathe. I don't know that the 4002 has the same dimensions as the 4003, but it would be a good guess that they are the same. I know I used english rather than metric. We here in the States are only about a century behind. I also included a .jpg of the lathe showing a tool post grinder that I designed. I've used the grinder to do a few jobs and it has worked OK. If you need other dimensions, let me know.