- Joined
- Jul 5, 2014
- Messages
- 2,776
I have considered shrink fitting it. I'm not sure if the gear would expand enough for it to slide on if heated in an oven. In thinking about it I don't think I want customers around the car with a torch. You and everyone here has enough sense to stay away from the flammable transmission fluid, but unfortunately there will be that one person that burns his garage down and I'll have a lawsuit on my hands.
It very difficult to write instructions that everyone can or will follow. I've had two customers literally destroy their transmission by using the bolts to pull the tail housing on. In my instructions I have in big red letters not to pull it together with the bolts and how to easily raise the shift rail so it will go together. But, no matter how I write the instructions I'd say most don't read them.
Including a piece of aluminum tubing is a good idea.
It very difficult to write instructions that everyone can or will follow. I've had two customers literally destroy their transmission by using the bolts to pull the tail housing on. In my instructions I have in big red letters not to pull it together with the bolts and how to easily raise the shift rail so it will go together. But, no matter how I write the instructions I'd say most don't read them.
Including a piece of aluminum tubing is a good idea.
Last edited: